Efficacy of impregnated active carbon in manganese removal from aqueous solutions

Document Type : Original Article

Authors

1 Assistant Professor of Food Science, Department of Food Science, Neyshabur branch, Islamic Azad University, Neyshabur, Iran

2 PhD of analytical chemistry, Islamic Azad University, Neyshabur, Iran

Abstract

Adsorption is a chemical method for water purification. In the present study, native and impregnated active carbon was used for adsorption to evaluate the efficacy of the process in manganese removal from aqueous solutions. Impregnation reaction was performed using the precipitate colloids of manganese oxides onto the carbon surface. X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy confirmed that the process was appropriate for carbon impregnation. The experiments indicated that the highest adsorption of Mn2+ ions by impregnated active carbon occurred at the pH of 9 (Mn2+ removal: 67.19%). In addition, the reaction time, mixing rate, and adsorbent dosage affected the efficacy of adsorption, and optimal results were obtained at the reaction time of 100 minutes, mixing rate of 100 rpm, and adsorbent dosage of 4 mg/l. In all the test conditions, impregnated active carbon had better performance in Mn2+ removal from aqueous solutions compared to native active carbon (99% confidence level). The Langmuir and Freundlich isotherm models were also applied to evaluate the adsorption process. Accordingly, RL was 0.07 and 0.027 for raw active carbon and impregnated active carbon, respectively. RL magnitude confirmed the suitability of the Langmuir model for Mn2+ adsorption using impregnated active carbon. According to the results, impregnated active carbon exhibited the maximum adsorption capacity (qmax) of 20.53 mg/g, while this value was estimated at 6.62 mg/g in raw active carbon. On the other hand, the adsorption kinetic analysis indicated that the pseudo-second order mode and intra-particle diffusion model could be used for this process.   

Keywords


1. Zapffe C. The history of manganese in water and methods for its removal. J Am Water Works Assoc 1933; 25(5): 655-676.
2. Massoudinejad M R, Eslami A, Khashij M. Removal of Mn2+ from aqueous solution using Clinoptilolite coated with manganese dioxide. J Saf Promot Inj Prev 2015; 2(4): 265-272. [In Persian]
3. Islam A A, Goodwill  J E, Bouchard R, Tobison J E. Characterization of filter media MnOX(S) surfaces and Mn removal capability. J Am water Works Assoc 2010; 102(9): 71-83. 
4. Tobiason J E, Bazilio A, Goodwill J, Mai X, Nguyen C. Manganese removal from drinking water sources. Current Pollution Reports 2016; 2(3): 168-177.
5. Zhang Z, Zhang Z, Chen H, Liu J, Liu C, Ni H, et al. Surface Mn(II) oxidation actuated by a multicopper oxidase in a soil bacterium leads to the formation of manganese oxide minerals. Sci Rep 2015; 5:1-13.
6. Chen C, Apul O G, Karanfil T. Removal of bromide from surface waters using silver impregnated activated carbon. Water Res 2017; 113: 223-230.
7. Edwin Vasu A. Surface modification of activated carbon for enhancement of nickel(II) adsorption. J Chem 2008; 5(4): 814-819.
8. Gallios G P, Tolkou A K, Katsoyiannis J A, Stefusova K, Vaclavikoa M, Deliyanni E. Adsorption of arsenate by nano scaled activated carbon modified by iron and manganese oxides. Sustainability 2017; 9(10): 1684-1702.
9. Knocke W, Roman J R, Thompson C PJ. Soluble manganese removal on oxide-coated filter media. Am Water Works Assoc 1988; 80(12): 65-70.
10. Morgan J, Stumm W. Colloid-chemical properties of manganese dioxide. J Colloid Sci 1964; 19(4): 347-59.
11. Taffarel S R, Rubio. Removal of Mn2+ from aqueous solution by manganese oxide coated zeolite. Miner Eng 2010; 23(14): 1131-1138.
12. Teng Z, Yuan H J, Fujita K, Takaziwa S. Manganese removal by hollow fiber micro-filter. Membrane separation for drinking water. Desalination 2001; 139(1-3): 411-418.
13. Goldstein J, Newbury D, Williams D. X-Ray spectrometry in electron beam instruments. Plenum Press, 1995, New York.
14. Dhoble R M, Lunge S, Bhole A G, Rayalu S. Magnetic binary oxide particles (MBOP): a promising adsorbent for removal of As (III) in water. Water Res 2011; 45(16): 4769-4781.
15. Yakout S M, Sharaf El-Deen G. Characterization of activated carbon prepared by phosphoric acid activation of olive stones. Arabian J Chem 2016; 9: 1155–1162.
16. Dashtinejad M, Samadfam M, Fasihi J, Grayelifumeshkenar F, Sepehria H. Synthesis, characterization, and cesium sorption performance of potassium nickel hexacyanoferrate-loaded granular activated carbon. Part Sci Technol 2014; 32(2): 348–354.
17. Kumar H, Manisha H, Sangwan P. Synthesis and characterization of MnO2 nanoparticles using co-precipitation technique. Int J Chem Chem Eng 2013; 3(3): 155-160.
18. International center for diffraction data 2017. Available at: www.icdd.com
19. Kordesh K V, Batteries (Manganese Dioxide). Marcel Dekker. 1974, New York.
20. Rodrigues S, Munichndaraiah N, Shukla A K. A cyclic voltammetric study of the kinetics and mechanism of electrodeposition of manganese dioxide and mechanism of electrodeposition of manganese dioxide. J Appl Electrochem 1998; 28(11): 1235- 1241.
21. Nijjer S, Thonstad J, Haarberg GM. Oxidation of manganese(II) and reduction of manganese dioxide in sulphuric acid. Electrochim Acta 2000; 46(2-3): 395-399.
22. Petitiperre J Ph, Comminellis Ch, Plattner E. Oxydation Du MnSO4 en dioxyde de manganese dans H2SO4 30%. Electrochim. Acta 1990; 35(1): 281-287.
23. Kao W H, Weiber V J. Electrochemical oxidation of manganese (II) at a platinum electrode. J Appl Electrochem 1992; 22(1): 21-27.
24. Da Silveria A N, Silva R, Rubio. Treatment of acid mine drainage (AMD) in South Brazil. Comparative active processes and water reuse. Int J Miner Process 2009; 93(2): 103-109.
25. Izlen Cifci D I, Meric S. Manganese adsorption by iron impregnated pumice composite. Colloids Surf A Physicochem Eng Asp 2017; 522: 279-286.
26. Alagumuthu G, Veeraputhiran V, Venkataraman R.Adsorption isotherms on fluoride removal: batch techniques. Arch App Sci Res 2010; 2(4): 170-185.